Burners

Xeamos offers a number of burner systems that have been developed for special applications. These burner systems have been manufactured in small series during the last few years and in use have proven their function and reliability. 

SFB Diesel Fuel Burners for the active regeneration of Diesel Particle Filters

The Xeamos Fuel Burner system has been especially designed to increase the temperature of exhaust gases in order to regenerate diesel particle filters. The system is designed for intermittent on-off cycling or modulating control and can withstand high back pressures and pressure fluctuations. The system is Lloyds Register approved for use on Inland Waterway Vessels and Special Service Craft. The SFB system is also part of our MPAT and DPF-S emission reduction systems. 

Features:

Fuel: Diesel, MGO(DMA, DMX)
Thermal heat: SFB70:            30-90   kW
SFB100:          40-120 kW
SFB150:          60-180 kW
Higher capacities: On request.
Backpressure: Standard: up to 100 mbar
Optional: up to 500 mbar
Temperature:  Upstream burner max. 500°C (while burning) / downstream burner max. 700°C
Distribution:  We can design the heat distribution tube to ensure optimum heat distribution and prevent hot spots
Control: PLC based control and safety system according EN 746-2
LR approved
Extended OBD (diagnostics)
Data-logging
Automatic backpressure compensation

SLB Diesel Burner for the active regeneration of Diesel Particle Filters

The Xeamos SLB burner system has been especially designed to increase the temperature of exhaust gases in order to regenerate diesel particle filters. The system is designed for intermittent on-off cycling or modulating control and can withstand high back pressures and pressure fluctuations. As opposed to the SFB system, the SLB system is not Class approved. The SLB system can be completely 24 VDC powered. 

Features:

Fuel: Diesel, MGO(DMA, DMX)
Thermal heat:: SLB50:            30-50   kW
SLB70:            45-80   kW
Backpressure: Standard: Up to 100 mbar
Optional: Up to 150 mbar
Temperature:  Upstream burner max. 500°C (while burning) / downstream burner max. 700°C
Distribution:  We can design the heat distribution tube to ensure optimum heat distribution and
prevent hot spots.
Control: EN 746-2 based
Extended OBD (diagnostics)
Data-logging
Automatic backpressure compensation

 

 

In-Line burner modules for the active regeneration of Diesel Particle Filters and other process applications

All SFB and SLB burners can be supplied as an In-Line module with an interface connection according to your own specifications. All modules are designed for a specified flow, temperature, pressure and temperature uniformity. Naturally the systems are all checked for hotspots on the steelwork. 

SFB Inline Burner Unit

SFB 150 Inline Burner Unit test

Made to measure burners:

On request, we can design and manufacture special burners for gas and liquid fuels. To illustrate this, below are a few of the burner types that we have supplied in the past:

  • High pressure burners
  • BBQ burners
  • Burners for points heating
  • Direct fired hot air blowers
  • Tube burners
  • Air heating burners with a high turn down
  • Low Emission burners

If you have a question, our engineers will be happy to answer it!

Contact